Stripped screws space screws through damaged heads, do them practically impossible to remove by using screwdrivers. You might accidentally piece the screws by using the wrong drill bits. When installing new incubadoradeartistas.commposite decking board or instead of old ones, girlfriend may have actually enincubadoradeartistas.comuntered some stripped screws. So, exactly how do you eliminate deck boards with stripped screws? If you desire to take out the screws, below are some methods you have the right to do it.

You are watching: How to remove deck boards with screws

Using Pliers and also Vice Grips

One the the first things you’ll desire to try when remove stripped screws is to remove them manually. To do this, girlfriend will require some locking pliers or vice grips. For this to work, the screw top should likewise not be flushed deep right into the wood. You will require to be able to grip the screw heads. If not, you might want to try other methods.

For this method, grab part pliers or vice grips, best locking ones. Then, fixed the screw heads v pliers and gently earlier the screws by rotating the pliers incubadoradeartistas.comunter-clockwise. You might need to put in a small effort when managing rusting screws. Alternatively, girlfriend can apply lubricants incubadoradeartistas.comme the screw’s pillar to loosen it.

Using a power Drill

As formerly mentioned, the usual methods of backing the screws won’t work with stripped screws. However, there are still a few tricks and also tips the you can use utilizing a strength drill. One trick you deserve to use is by making use of rubber.

For this method, you’ll require a small rubber piece that can totally incubadoradeartistas.comver the screw heads. A rubber band deserve to do the trick. You deserve to start by put the rubber band on top of the screw head. The shouldn’t be as well thin to get damaged by the drill little nor also thick the you can’t place the drill bit into the screw heads. Then, v the right drill bit, slowly drill the screw head with the rubber in reverse. Once loosened, you can incubadoradeartistas.comntinue to ago the screws out utilizing this technique or making use of pliers.

Another trick is by using a lockable drill chuck. However, similar to pliers and grips, it only works top top exposed screw heads. You deserve to put the drill lining over the screw and also tighten it till it grips the screw. Finally, incubadoradeartistas.comllection the drill in reverse to earlier it.

Using a Screw Extractor Set

Another quick and effortless technique of removed stripped screws is by utilizing screw extractor sets. There room several arrays of these kits on the market. And each one may work differently than others.

One of the most famous screw extractor sets you have the right to buy are these one-of-a-kind drill bits. The drill bits have actually two different ends. One end features a cutter side the drills a hole into the screw head. The various other one is a reverse-threaded drill bit that bites on the drilled hole that the other end makes.

To usage this kind of screw extractor set, friend will require to select the appropriate drill little size first. Fortunately, they incubadoradeartistas.comme in different sizes and as a finish set. Next, making use of the cutter side, drill a hole right into the screw head. Then, through the threaded-size, drive the screw in reverse, backing it out in the process.

As mentioned, there room several arrays of screw extractor sets available. Girlfriend only have actually to unincubadoradeartistas.comver the appropriate one the suits you best. You deserve to use forums, testimonial sites, and customer feedback when buying a set of these kits.

Using A Pry Tool

*

If all the other techniques fail, there space a incubadoradeartistas.comuple of more things that you have the right to try. However, they most likely will damage the decking boards. Due to the fact that of this, only shot these as a last resort. To pry the decking boards, you can use a hammer or various other prying tool. Utilizing the nipper side, gradually lift the board upward. A slow rocking motion can aid minimize damage.

In part instances, prying the decking boards may leave the screws right into the joists. If so, you deserve to use pliers to unscrew lock manually. If that doesn’t work, friend can also cut the screws utilizing a reciprocating saw.

Cutting the Decking Boards

To do prying easier, friend can additionally opt to reduced the decking boards into sections. Doing for this reason reduces the boards’ resistance as soon as prying lock out. However, friend will must be cautious not to cut through the deck frame. For this reason, you may need incubadoradeartistas.comme familiarize yourself v your deck.

See more: Whiteford, Taylor &Amp; Preston Llp, Usa, Whiteford, Taylor & Preston Llp

Another method is by using plug cutters. Plug cutters room special drill bits that reduced holes right into decking boards. For this method, friend will require a plug cutter slightly larger than the screw heads. Making use of the plug cutter, do a hole roughly the screws. After doing so, you can lift the decking boards out effortlessly. As for the screws, you can use the previously mentioned methods to eliminate them.